
|
SPX/MARLEY
COOLING TECHNOLOGIES
Cooling Towers:
A full line of open circuit evaporative cooling towers,
closed circuit fluid coolers, and evaporative condensers.
Tower cells are available in galvanized steel, stainless
steel, fiberglass and wood with options of stainless steel
basins, belt or gear drive, crossflow or counterflow, field
erected or packaged.
Dry Cooling: Air-cooled “fin and tube” condensers
and forced or induced draft heat exchangers.
Reconstruction: Teams are available with the goal of
restoring your cooling tower to its optimum thermal
performance and structural integrity.
Rental
Towers
: For emergency or supplemental cooling
Parts
and Accessories: Most items in stock for quick
shipment.
Sizing Programs: Available online at www.update.com
www.spxcooling.com
|
 |
RECOLD (a division of SPX/Marley Cooling Technologies)
High quality product line of packaged forced draft towers,
evaporative condensers and closed circuit fluid coolers.
Towers come with stainless steel pans and non-corrosive
copper coils for extended service life.
www.spxcooling.com |
 |
EDWARDS
FIBERGLASS, INC
Custom fiberglass storage tanks and accessories for storing
cooling tower drain down and filter backwash water.
www.edwardsfiberglass.com |
 |
APV (a
division of SPX)
A plate type heat exchanger designed by APV to provide
maximum efficiency and cost effectiveness in handling a wide
variety of heat transfer applications. Units come in
different configurations.
Single Wall Gasketed (Paraflow) Plate Heat Exchangers - The
traditional plate and frame heat exchanger.
Double Wall (Duo-Safety) Plate Heat Exchangers - Used to
prevent cross contamination of the fluids.
Semi-Welded (Paraweld) Plate Pair Plate Heat Exchangers - No
gaskets on one plate channel, gasket on the other side for
the ultimate in flexibility and safety.
ParaBrazed Plate Heat Exchangers - Compact, cost effective
unit designed to deliver high thermal efficiency while
maintaining lower pressure drops. It’s the perfect choice
for many single and two-phase heat transfer applications for
industrial and refrigeration duties.
www.apv.com
|
 |
AIM (Aurora Industrial Machining)
Custom designed shell and tube, ASME code and TEMA design,
process heat exchangers, condenser and pressure vessels.
www.auroraheatexchangers.com |
 |
KRUEGER
ENGINEERING & MFG COMPANY
Large custom shell and tube heat exchangers and round shell
steam condensers to ASME, TEMA and HEI codes and standards.
www.kemco.net |
 |
PEP
FILTERS, INC.
A complete solution
to your cooling tower water filtration problems with a wide
variety of standard and custom pressure centrifugal
separators and media filters that remove suspended solids
from water and fluid systems.
Clean water in your cooling tower means lower maintenance
costs, greater energy efficiency and reduced water and
chemical usage. Remove the sand, grit and other particles
from your cooling tower water before they can cause problems
like clogged spray nozzles, fouling of heat transfer
devices, and accumulation in the tower basin.
Full-Stream Protection ensures immediate and
continuous removal of virtually all solids.
Basin Cleaning Protection prevents solids
accumulation in the basin and attacks conditions that breed
harmful bacteria.
Side-Stream Protection removes solids from a portion
of the recirculating flow.
ARKAL Innovative
disc type filter, featuring an automatic backwash cleaning
cycle for minimum maintenance and efficient filtration. Disc
filter systems are compact, lightweight and designed for
full or side-stream service in cooling water systems to
filter down to 20 microns.
www.pepfilters.com |
 |
HELLAN
STRAINER CO
Manual and automatic self-cleaning strainers.
Allows for removal of solids during full flow operation.
www.hellanstrainer.com |
 |
EIMCO WATER TECHNOLOGIES
A complete range of water intakes solution products. Intake
screening, pipeline filtration, condenser tube cleaning.
www.eimcowatertechnologies.com |
 |
GARDNER
DENVER
NASH (Liquid
Ring Pump Division)
Offering a wide range of products to meet our customers’
needs including liquid ring vacuum pumps, gas compressors,
dry vacuum pumps, side channel blowers, screw pumps, rotary
vane pumps, regenerative blowers and steam jet ejectors.
Parts
and repair service also available.
www.gardnerdenvernash.com |
 |
DELTAK
Heat Recovery Steam Generators (HRSG) for small gas
turbine CC plants, specialty heat recovery boilers for waste
incineration, solid fuel and process applications and SCR/CO
catalyst systems.
www.deltak.com |
 |
FINTUBE TECHNOLOGIES, INC
Rectangular and cylindrical economizers, tubular air
heaters, feedwater preheat systems. Boiler, heat exchanger
and mechanical tubing. X-ID boiler and shell & tube heat
exchanger tubes. Finned products.
www.fintubetech.com |
 |
LE GROUPE SIMONEAU
Designs, builds and installs
industrial, institutional and commercial high efficiency
boilers.
www.groupesimoneau.com |
 |
|
 |
STERLING
DEAERATOR
CO
A full line of spray and tray-type feedwater
deaerators and accessories. Sterling
uses a two-stage system of heating and deaerating feedwater
which reduces dissolved oxygen concentration to less than
0.005 cc/liter and completely eliminates the carbon dioxide
concentration.
www.sterlingdeaerator.com |
 |
AQUATECH
INTERNATIONAL
Industrial
water and waste treatment systems. A full scope of water
treatment solutions in design and engineering, project
management, manufacturing, turnkey installation and
commissioning/field troubleshooting for pretreatment, ion
exchange, membrane processes, waste water recycle/reuse,
zero liquid discharge, industrial concentration and
desalination.
www.aquatech.com |
 |
TAS
(Turbine Air Systems)
Efficient inlet air pre-cooling
systems for combustion turbines using exhaust heat driven
absorption systems, mechanical chilling systems and peaking
thermal energy storage systems to increase turbine MW output
at high ambient temperatures.
www.tas.com |
 |
WAHLCOMETROFLEX,
INC
Designs, manufactures and services a broad range of high
performance isolation and flow control dampers, expansion
joints and related duct systems. Products include bypass
diverters for gas turbines, utility Selective Catalytic
Reduction (SCR) systems, Flue Gas Desulphurization (FGD)
dampers, louver dampers, guillotine dampers, butterfly
dampers, metal expansion joints and fabric expansion joints.
www.wahlcometroflex.com
|
 |
ATCO ENVIROTECH (formerly Higgott-Kane)
Selective catalyst removal system (SCR) for simple cycle
power generation.
www.atcoet.com |
 |
WEIR
VALVES & CONTROLS (Atwood & Morrill)
Engineered check valves, wye
globe valves, parallel slide gate valves, and Tricentric
butterfly valves
www.weirpowerindustrial.com |